It takes a special adhesive to hold fast when the temperature goes up.

And Clear-Tite-HHR is a special adhesive. Developed to hold fast at temperatures of up to 250°F, it’s the clear choice for installations where a hot pan, a warm oven or a steamy faucet might cause lesser glues to soften.

Maybe that’s why Clear-Tite-HHR has been the clear choice for more than 40 years for everything from tile and linoleum to cabinets, countertops, glass, carpeting and more. It leaves your installation flawless – even when the heat is on.


Used in the manufacture of kitchen cabinets, counter tops, desktops, tabletops, store fixtures, and hard orthotics.

  • Wood
  • Metal
  • Rubber
  • Leather
  • Glass
  • Carpeting
  • Cove Base
  • Plastics

General Instructions

  1. Clean your materials before cementing.
  2. Apply an even coat to BOTH surfaces to be joined.
  3. Press together. Cement dries and bond sets in 2-5 minutes.
  4. Bond strength increases with age. Cement may also yellow over time.

Technical Data

  • Base: Neoprene/ Resin
  • Solvent: Toluene, Acetone, MEK, Heptane
  • Color: Beige
  • Viscosity: Light, 750–900 cps at room temperature.
  • Application: Brush, Roller, Notched Trowel, Squeeze Bottle
  • Solids: 21% ± 1 % (approx.)
  • Net Weight: 7.2 Lbs/Gal (approx.)
  • Temperature Range: -30° to 250°F
  • Flash Point: 17° F
  • Shelf Life: 1 year from date of manufacture
  • Tack Time: 10 to 30 minutes
  • Coverage: 1oz/sf (bonded area)

Copyright 2021 - RH Adhesives. All Rights Reserved.