Get the Glue
You’ll need about 1 oz. per square foot.
All 4 oz. through 32 oz. cans have a brush-cap top.
| Image | Name | Total Number of Cans |
|---|---|---|
 | HH-66 Vinyl Cement |
Why Choose RH Adhesives
for Your Vinyl Awning Repairs?
RH Adhesives makes the strongest PVC vinyl glue. HH-66 Vinyl Cement bonds fast, holds tight, and lasts for years.
Stop leaks before they spread. Patch rips, repair seams, and fix vinyl awning damage in minutes.
No sewing. No heat welding. No failures. You get a permanent bond that withstands extreme conditions and constant use.
- Long-Lasting Adhesion – Bonds permanently with a single application.
- Excellent Durability – Won’t crack, peel, or weaken with heavy use.
- Flexible Bond – Holds strong to awning material that stretches, folds, and moves.
- Weather & Heat Resistant – Holds through heat, humidity, and sun exposure.
- Beats Repair Tape & Super Glue – HH-66 is an industrial-grade vinyl adhesive.
The Awning Repair Solution
That Works Every Time
Awning damage doesn’t mean you need a costly replacement. Repair fabric tears or punctures the right way with our HH-66 Vinyl Cement.
Apply once for a waterproof bond that’s stronger than the original vinyl. No downtime. You get a durable seal that survives every season.
HH-66 Vinyl Cement
HH-66 is the strongest PVC adhesive solution for DIY awning repairs. It’s waterproof, bonds fast, stays flexible, and resists extreme weather. It even works underwater.
How to Repair Vinyl Awnings
with HH-66
HH-66 is safe and simple to apply on PVC awnings. Follow these three steps for a seal that won’t fail:
Prepare
Cut a vinyl patch with at least 2 inches of overlap on all sides of the damaged area. Round the corners to prevent peeling. Clean the area with alcohol or our HH-66 Thinner.
Apply
Spread an even layer of HH-66 Vinyl Cement on both surfaces. Let it sit until tacky (about 2 minutes).
Attach
Press the patch firmly onto the damaged area. Apply even pressure throughout to smooth out air bubbles. Remove excess adhesive. Let it cure for at least an hour before use. Full strength is achieved in around 24 hours.
FAQs About Vinyl Awning Repairs
How do I patch an awning with HH-66?
To patch a vinyl awning with HH-66, follow these steps:
- Cut the patch 2 inches larger than the tear on all sides. Round the corners to avoid peeling. Clean both surfaces with HH-66 Thinner.
- Brush HH-66 Vinyl Cement onto both surfaces. Wait until tacky (about two minutes).
- Press the patch on firmly. Apply even pressure throughout to remove air bubbles. Remove excess adhesive. Let it bond for one hour.
How much HH-66 do I need for my repair?
Use 1 ounce for every square foot of vinyl you’re bonding. That covers the patch and the vinyl surface. Small repairs take 1–2 ounces. Bigger jobs may need 4 ounces or more.
How long does HH-66 take to dry?
HH-66 bonds in about an hour, but it reaches full strength about 24 hours after application.
How long do awning repairs last?
HH-66 creates a bond that’s stronger than the vinyl itself. Depending on frequency of use, the bonds created by HH-66 can last the lifetime of your vinyl awning.
Can HH-66 seal stitched seams?
HH-66 is best for repairing rips, tears, and punctures. If the seam provides a 2-inch overlap or more, HH-66 can be a good option.
Does HH-66 work on non-vinyl materials?
HH-66 is ideal for PVC vinyl-coated materials, such as awnings, mats, bounce houses, etc. For non-vinyl material repairs, check out our other available products.
Does HH-66 work on wet vinyl awnings?
Yes, HH-66 does work on wet vinyl awnings. Repairs can be done on wet surfaces, dry surfaces, and even underwater.
Fix Your Vinyl Awning Fast with HH-66
One tear can cost you thousands of dollars. Stop it fast with our weather-resistant vinyl awning glue.
Order online from our Acton, MA factory or find your local distributor.
Need bulk orders? Contact our sales team for case lot quantity pricing.