Re-inflate the party with RH Adhesives’ Vinyl Patch Kit. Here’s how.
When the bounce house sags, so does the fun. But it takes just a few minutes to get your party back on track.
HH-66 is the industry’s leading PVC vinyl adhesive; it’s waterproof, weather and temperature resistant and forms bonds stronger than the vinyl your bouncy castle, boat or house is made from. And that makes the HH-66 patch kit the perfect way to make fast, permanent repairs.
It takes about 5 minutes to make a repair with our Vinyl Patch Kit. Keep one on hand for emergencies – or buy a can of HH-66 Vinyl Cement if you’re repairing multiple holes.
Get the kit.
Kits include a 1 oz. tube of HH-66 TF Vinyl Cement, one 10-inch by 10-inch white vinyl tent patch, an applicator brush, and two alcohol wipes.
| Image | Name | Total Number of Cans |
|---|---|---|
| Vinyl Patch Kit |
1. Prepare
- Cut patch to appropriate size, ensuring a 2-inch overlap on all sides. Round corners to minimize peeling.
- Clean surfaces with alcohol or a compatible solvent. Sand any glossy surfaces lightly.
2. Apply
- Apply an even coat of HH-66 TF Vinyl Cement to both surfaces to be joined.
- Allow cement to set until tacky, typically around 2 minutes. Cement will remain tacky for just a few minutes.
3. Attach
- Press patch on bounce house firmly while tacky.
- Apply even pressure throughout to remove air bubbles.
- Allow to bond for at least an hour before use. Strongest hold achieved after one day.
- Remove any excess adhesive.
Find the Right Glue
RH Adhesives products are available both globally and right here on our website. You can order directly from our factory in Acton, Massachusetts or through a local distributor or reseller near you.
For larger-sized quantities sold by the case, contact us and a sales representative will be happy to assist you.







