For rental companies and parks, there’s no better way to make inflatable repairs.
Commercial inflatables aren’t cheap – which means for your business to succeed, your inventory of inflatables needs to last.
Whether you rent bounce hoses or operate your own fleet of inflatable attractions, rips and punctures are a part of being in business. But you don’t want to fix tears twice – which is why, when repair season comes, so many pros reach for HH-66.
The world’s favorite vinyl adhesive is fast, weatherproof and temperature resistant. It’s also permanent, forming a bond that’s stronger than the vinyl your inflatables are made of. Use a can for major repairs or offer Vinyl Patch Kits to your customers for one-off fixes in the field.
Get the Glue
You’ll need about 1 oz. per square foot.
4 oz. through 32 oz. cans come with a brush-cap top.
| Image | Name | Total Number of Cans |
|---|---|---|
 | HH-66 Vinyl Cement |
1. Prepare
- Cut patch to appropriate size, ensuring a two-inch overlap on all sides. Round corners to minimize peeling.
- Clean surfaces with HH-66 Thinner. Sand any glossy surfaces lightly.
2. Apply
- Apply an even coat of HH-66 to both surfaces to be joined.
- Allow cement to set until tacky, typically around two minutes. Cement will remain tacky for just a few minutes.
3. Attach
- Press patch on firmly while tacky.
- Apply even pressure throughout to remove air bubbles.
- Allow to bond for at least an hour before use. Strongest hold achieved after one day.
- Remove any excess adhesive.
Find the Right Glue
RH Adhesives products are available both globally and right here on our website. You can order directly from our factory in Acton, Massachusetts or through a local distributor or reseller near you.
For larger-sized quantities sold by the case, contact us and a sales representative will be happy to assist you.