Make patches or mend rips in minutes, with a bond stronger than the tent itself.

Your commercial tents are an investment.  But rips and punctures are part of the job.

When repair season rolls around, most industry pros reach for HH-66 Vinyl Cement.  It’s fast, weatherproof – and permanent.  So it only takes 5 minutes to get party and event tents back in lasting shape, ready for the road.

Get the Glue

You’ll need about 1 oz. per square foot.

4 oz. through 32 oz. cans come with a brush-cap top.

ImageNameTotal Number of Cans
HH-66 Vinyl Cement
HH-66 Vinyl Cement

The rule of thumb is that one ounce of adhesive will cover one square foot of both surfaces to be bonded. For more details, click here for our product calculator.

1. Prepare

  • Cut patch to appropriate size, ensuring a two-inch overlap on all sides.  Round corners to minimize peeling.
  • Clean surfaces with HH-66 Thinner.  Sand any glossy surfaces lightly.

2. Apply

  • Apply an even coat of HH-66 to both surfaces to be joined.
  • Allow cement to set until tacky, typically around two minutes.  Cement will remain tacky for just a few minutes.

3. Attach

  • Press patch on firmly while tacky.
  • Apply even pressure throughout to remove air bubbles.
  • Allow to bond for at least an hour before use.  Strongest hold achieved after one day.
  • Remove any excess adhesive.

Copyright 2024 - RH Adhesives. All Rights Reserved.