HH-66 Toluene Free Thinner

Our HH-66 Toluene Free Thinner is designed primarily for use with HH-66 Toluene Free Vinyl Cement.

  • Formulated specifically for use with HH-66 Toluene Free Vinyl Cement
  • Designed for thinning, spraying, reactivating, prepping, and cleaning your project and tools

For thinning or spraying our adhesives, we recommend adding drops of thinner as needed - up to (but not more than) 20% thinner. Tips for spraying our adhesives can be found here.

SKU: N/A Category:

Looking to buy in bulk? Please contact [email protected] for more information on purchasing case lot quantities.

This product is eligible for special wholesale pricing. Contact us at 978-897-8000 or [email protected] to learn more!

Our HH-66 Toluene Free Thinner is designed primarily for use with HH-66 Toluene Free Vinyl Cement.

This solvent-based thinner reactivates dried HH-66 Toluene Free Vinyl Cement or removes unwanted HH-66 from surfaces.

You also can use HH-66 Toluene Free Thinner to clean brushes, rollers, spray guns, and other types of applicators.  Since HH-66 Thinner is flammable, it should be used in a well-ventilated area.  Handle empty containers with care, as any residual solvent is flammable.

General Thinner Application Instructions

Use a brush or roller to apply a light layer of the appropriate HH-66 Toluene Free Thinner directly to the application.  Bond the pieces together as per the adhesive directions.

Add HH-66 Toluene Free Thinner (up to 20% thinner) to HH-66 Toluene Free Vinyl Cement until the original consistency is reached.  Mix until evenly dispersed.

Follow the manufacturers’ recommended cleaning procedure.  It is recommended to clean the applicator immediately after use.  Our thinners are flammable and should be used in a well-ventilated area.  Handle empty containers with care as residual solvent is flammable.

Add the appropriate thinner as needed (up to 20% thinner).  Mix until evenly dispersed.  Over-dilution can cause loss of bond strength.  A second application may be required to achieve the appropriate coverage for a good bond.

Usefulness depends on the sprayer and application.  It is not recommended to use more than 20% thinner for spraying.  With diluted adhesive, a second application may be required to achieve the appropriate coverage for a good bond.

Technical Data

  • Base:  Methyl Ethyl Ketone (MEK), Acetone, Ethyl Acetate
  • Color:  Clear
  • Viscosity:  1 cP (water-like) at room temperature
  • Application:  Brush, roller, spray gun, or mix into cement
  • Vapor Density:  Heavier than air
  • Relative Density:  Lower than water
  • Temperature Limit:  95° F
  • Shelf Life:  18 months from date of manufacture
  • Coverage:  Varies

NOTE:  May adversely affect some plastics and other materials.  Test first.

Copyright 2024 - RH Adhesives. All Rights Reserved.