RH Thinner
A companion product for our neoprene adhesives.
RH Thinner
Our RH Thinner should be used as a companion product for our neoprene adhesives (Clear-Tite, Duall-88, S-18).
- Formulated specifically for use with Clear-Tite Contact Cement, Duall-88 Leather Adhesive, and S-18 All-Purpose Adhesive
- Designed for thinning, spraying, reactivating, prepping, and cleaning your project and tools
Looking to buy in bulk? Please contact [email protected] for more information on purchasing case lot quantities.
This product is eligible for special wholesale pricing. Contact us at 978-897-8000 or [email protected] to learn more!
Our RH Thinner should be used as a companion product for our neoprene adhesives (Clear-Tite, Duall-88, S-18).
You also can use RH Thinner to clean brushes, rollers, spray guns, and other types of applicators. Since RH Thinner is flammable, it should be used in a well-ventilated area. Handle empty containers with care, as any residual solvent is flammable.
General Thinner Application Instructions
If your coat of adhesive is no longer tacky
Use a brush or roller to apply a light layer of the appropriate RH Adhesives Thinner directly to the application. Bond the pieces together as per the adhesive directions.
If the product has thickened in the container
Add the appropriate thinner until the original consistency is reached. Mix until evenly dispersed.
To clean our adhesives from brushes, rollers, spray guns and other types of applicators
Follow the manufacturers’ recommended cleaning procedure. It is recommended to clean the applicator immediately after use. Our thinners are flammable and should be used in a well-ventilated area. Handle empty containers with care as residual solvent is flammable.
If the product is too thick for your application
Add the appropriate thinner as needed. Mix until evenly dispersed. Over dilution can cause loss of bond strength. A second application may be required to achieve the appropriate coverage for a good bond.
To spray our cements, our appropriate thinner can be used to dilute the product
Usefulness depends on the sprayer and application. It is not recommended to use more than 20% thinner for spraying. With diluted adhesive, a second application may be required to achieve the appropriate coverage for a good bond.
Technical Data
- Base: Heptane, Toluene
- Color: Clear
- Viscosity: 1 cP (water-like) at room temperature
- Application: Brush, roller, spray gun, or mix into cement
- Vapor Density: Heavier than air
- Relative Density: Lower than water
- Temperature Limit: 95° F
- Flash Point: 14° F
- Shelf Life: 18 months from date of manufacture
- Coverage: Varies
NOTE: May adversely affect some plastics and other materials. Test first.
Find the Right Glue
RH Adhesives products are available both globally and right here on our website. You can order directly from our factory in Acton, Massachusetts or through a local distributor or reseller near you.
For larger-sized quantities sold by the case, contact us and a sales representative will be happy to assist you.